Manual

203
Enhancing Images
A pause dialog will be displayed; ad-
just settings as desired and then click
Resume Batch to return to the batch
processing dialog.
Apply settings in
Select this option to process the images in the selected folder using joint settings cre at ed
using the Save… option in the Settings > Image Adjustment menu (
195). When
this option is se lect ed, a joint settings fi le can be selected by clicking the Browse button
to its right.
Apply settings already in NEF fi les
Check this option to apply settings previously saved with NEF fi les. If this item is not
checked, the saved settings will be re plac ing with the set tings chosen in the Image Ad-
justments sec tion.
3
Specify how images will be processed
In the Image Adjustments section, specify the operations to be performed on each im-
age.
Apply current settings
Select this option to process the images in the selected folder using the settings cur rent ly
in effect in Nikon Capture 4 Editor.
To change settings before beginning
batch processing, click Change Set-
tings…. A dialog will be displayed
where an image can be opened to assist
with the process of adjusting settings.
Click No to adjust settings without open-
ing an image.
To open the fi rst image in the source
folder, click Load First Image. To select
another image from the source folder,
click Choose Image…. The dialog
shown at right will be displayed; select
an image and click OK.
Orientation
Images processed using the batch option are saved in their original orientation. When Apply cur rent
settings is selected, images will not be rotated or fl ipped, regardless of whether fl ips or rotations have
been applied to the image in the active image window. If batch processing is per formed on images that
have been fl ipped or rotated in Nikon Browser, these changes in orientation will be preserved when the
image is saved.
Existing Image Adjustment Settings
If the Apply settings already in NEF fi les option is not checked, any changes to set tings stored with
fi les saved in NEF format will be ignored, and the settings in the selected settings fi le applied. If you have
pro cessed a series of NEF images separately and want to save them all as sixteen-bit TIFF, you can check
this option and use batch processing to save all the images to a single folder in sixteen-bit TIFF format.