Manualshelf

Manual

ManualsBrandsNikon ManualsSoftwareNikon Capture
221222223224225226227228229230
220
The Camera Control Window
Macintosh
1
Connect the camera
Connect the camera
to your computer and turn the camera on. If you are using a D1-
series camera, choose “PC” as the operating mode. If you are using a D100 camera, turn
the function dial to P, S, A, or M. Users of the D2H can select any mode other than M-UP
(mirror up).
2
Close Nikon Transfer
If Nikon Transfer starts, click the Close button.
3
Start Nikon Capture 4 Camera Control
Double-click the Nikon Capture 4 Camera Control icon in the folder to which you
installed Nikon Capture 4.
The Camera Control window will be displayed.
Prod uct Key
If prompt ed to supply a product key when starting Nikon Capture 4 Editor or Nikon Capture 4 Camera
Control, enter the prod uct key for Nikon Capture 4.
Oth er Ways of Starting Camera Con trol
Nikon Capture 4 Camera Control can be started by dou ble-clicking the Nikon Capture 4 Cam era Con-
trol icon ( ) in the folder to which you in stalled Nikon Capture 4 (Mac OS 9). If Nikon Capture 4 was
reg is tered in the Dock dur ing installation, Mac OS X users will be able to start Nikon Capture 4 Cam era
Control by clicking the Nikon Capture 4 Camera Control icon ( ) in the Dock.