Manual

222
The Camera Control Window
1
Start Nikon Capture 4 Camera Con trol ( 218)
Connect the camera to your computer and turn the
cam era on. If you are using a D1-series camera, set
the op er at ing mode to PC.
Capturing Photographs to Disk
If Nikon Capture 4 Camera Control is running when a D2H or D100 camera is con nect ed, or a
D1-series cam era is con nect ed with the mode dial set to PC, pictures taken with the camera
will be stored on your computer hard disk, not the camera memory card.
Open the Camera Control window
Open the Download Options dialog
Close the Camera Control window
Exit Camera Control.
Take pictures.
Adjust capture options.
Start Nikon Capture 4 Camera Con trol.
222
223
225
225
Connect the camera to your computer.
Finish shooting.
Rotate images to match camera orientation
(D1-series / D100 only).
224
Auto Image Rotation (D2H Only)
If On (the default setting) is selected for Auto image rotation in the camera setup menu, the D2H
will detect camera orientation and automatically rotate photographs as they are taken (note that in
continuous mode, the rotation applied to the fi rst image in each burst applies to all images in the series,
even if camera orientation is changed during shooting). If Off is selected, all images will be recorded in
landscape orientation regardless of how the camera is held. The options in the Nikon Capture 4 Camera
Control Image menu are not available when the D2H is connected.