Manual

224
The Camera Control Window
When a new image is received from camera
Choose the application that will be used to display captured photographs.
Do nothing
Photographs are saved to the computer hard disk.
View with Nikon Viewer
After the image is saved to disk, Nikon Browser and Nikon Viewer will start automatical-
ly. The destination folder for captured images will be opened in Nikon Browser with the
captured image selected, and the captured image will be displayed in Nikon Viewer.
Show it with the Nikon View Browser
After the image is saved to disk, Nikon Browser will start automatically. The destina-
tion folder for captured images will be opened in Nikon Browser with the captured
image selected.
Attach IPTC Information
Check this option to add IPTC information to captured images ( 33) and enable the
Copy Shooting Data to IPTC Caption option.
IPTC Information…
Click ing this button displays a dialog where you can se lect the IPTC information, includ-
ing key words and captions, that will be added to im ag es as they are cap tured. For more
in for ma tion, see “Nikon Transfer” ( 33).
Copy Shooting Data to IPTC Caption
Check this option to copy shooting data to the caption fi eld of images as they are captured.
After adjusting the above options, click OK to exit the dialog and apply settings to sub se -
quent photographs.
4
Choose whether to rotate captured images (D1-series / D100 only)
The options in the Nikon Capture 4 Camera Control Image menu can be used to rotate cap-
tured images according to camera orientation. Use these options when taking photographs
in tall (“portrait”) orientation. Select an option once to enable it, again to disable it.
Rotate all downloaded images by 90 degrees CCW
If this option is checked, images will be rotated 90 ° counterclockwise as they are saved.
Rotate all downloaded images by 90 degrees CW
If this option is checked, images will be rotated 90 ° clockwise as they are saved.
“View Captured Image Immediately”
If View captured image immediately is not checked in the Nikon Browser View menu when View
with Nikon Viewer or Show it with the Nikon Browser is selected, the destination folder must be
opened manually using the “Transfer Destination” button. If View captured image immediately is
not checked in the Nikon Viewer View menu when View with Nikon Viewer is selected, captured
images can be displayed by clicking the “Next Image Selected” button (Macintosh only).
Auto Image Rotation (D2H Only)
If On (the default setting) is selected for Auto image rotation in the camera setup menu, the D2H
will detect camera orientation and automatically rotate photographs as they are taken (note that in
continuous mode, the rotation applied to the fi rst image in each burst applies to all images in the series,
even if camera orientation is changed during shooting). If Off is selected, all images will be recorded in
landscape orientation regardless of how the camera is held. The options in the Nikon Capture 4 Camera
Control Image menu are not available when the D2H is connected.