Manual

233
Getting to Know Nikon Capture 4 Camera Control
The Nikon Capture 4 Camera Control Window
The Nikon Capture 4 Camera Control window shows current camera settings, which may be
viewed by clicking the fi ve page selection tabs. Camera settings can be altered using the
controls in each tab as described below. The simulated LCD panel and the Hide Camera
Controls, Down load Options…, and shoot but tons can be ac cess ed from all fi ve tabs.
The Function Dial (D100 Digital Cameras Only)
The D100 can only be used to take photographs when the function dial is set to P, S, A, or M. At other
settings, the shoot buttons in the Camera Control dialog will be disabled and the simulated LCD panel
will not be displayed.
Connection Status
This area shows the following information about the camera currently connected:
• Camera name
• Camera orientation (D2H only)
Horizontal
Rotated 90 °
clockwise
Rotated 90
counterclockwise
Note that if Off is selected for Auto image rotation in the camera setup menu, the
horizontal icon will be displayed regardless of camera orientation.
Hide Camera Control
Click this button to hide the Camera Control panels during shooting.
Download Options
Click this button to choose a destination and fi le name for pictures captured from the cam era.
Enable controls on the camera body (D2H only)
Check this option to enable the D2H camera controls, allowing settings to be adjusted and
photographs to be taken directly from the camera. The camera power switch, AF-area mode
selector, and depth-of-fi eld preview button can not be used when this option is checked; all
other controls function normally.
Camera Control
page selection
tabs
Simulated LCD
panel
Shoot buttons
Connection
status
D2H D100