Manual

234
The Camera Control Window
Simulated LCD Panel
This panel shows the information displayed in the camera’s viewfi nder, with the ex cep tion of
camera errors. Clicking on an indicator in the panel opens the Nikon Capture 4 Camera Con-
trol window to the tab that controls the selected option, where ad just ments can be made.
When the D2H is connected, the amount of memory remaining in the camera memory buf-
fer is displayed at the right edge of the simulated LCD panel. This information is updated at
regular intervals, but temporary discrepancies may exist between the display and the actual
amount of memory remaining in the buffer.
Shoot Buttons
Click either of these buttons to take a photograph at current settings.
AF and Shoot / AF and Start
When this button is clicked, the camera will perform an autofocus and then re lease the
shut ter to take a pho to graph. If the D2H is connected with continuous high-speed or
continuous low-speed mode selected (
239), this button will be labeled AF and Start;
click to perform an autofocus operation and start shooting.
Shoot / Sta r t
Click this button to take a photograph. If the D2H is in continuous high-speed or continu-
ous low-speed mode ( 239), this button will be labeled Start; click to start shooting.
If the selected focus mode is single-servo AF, an autofocus operation will be performed
before the shut ter is released.
Camera Settings That Can Not Be Adjusted from Nikon Capture
The following operations can not be performed from Nikon Capture 4 Camera Control:
Operation Camera
Status not displayed
Burst photography (continuous shooting mode) D1-series/D100
Continuous servo autofocus D1-series/D100/D2H
Pressing the shutter-release button halfway to check focus D1-series/D100/D2H
Manual aperture adjustment using the lens aperture ring D1-series/D2H
Reactivating the camera after it has entered sleep mode D1-series
Depth-of-fi eld preview D1-series/D100/D2H
Auto bracketing D1-series/D100/D2H
Compression options for NEF (RAW) images D100
Operation assigned to FUNC. button with Custom Setting f4 D2H
Status displayed
Focus mode D1-series/D100/D2H
Metering D1-series/D100
Exposure mode D100
Shooting mode D100
Shutter-speed lock D1-series/D2H
Aperture lock D1-series/D2H
Autoexposure lock D1-series/D100/D2H
Speedlight fl ash-level compensation D2H
M-
UP (mirror up) mode selection D2H
Selection of second center focus area group in group dynamic-AF mode D2H