Manual

236
The Camera Control Window
The Exposure 2 Tab
The following settings can be adjusted from the Exposure 2 tab. See the camera manual for
de tails:
Controls displayed when D2H is
connected
Controls displayed when D100 is
connected
Focus Area
The focus area can be selected using the arrow buttons. D1-series and D100 cameras offer
a choice of fi ve focus areas, the D2H eleven. In group dynamic-AF area mode (D2H only) the
selected focus-area group is displayed (the groupings used are determined by the option se-
lected for Custom Setting a3, Group dynamic AF). See the camera manual for details. For
information on AF-area mode and focus mode, see “The Mechanical Tab” ( 239).
Metering Mode
Unless Enable controls on the camera body is checked, the metering mode can be se-
lected from this menu (D2H only). Metering mode defaults to the option selected with the
camera metering selector. If Enable controls on the camera body is checked or a D1-
series or D100 camera is connected, the current metering mode will be shown, but changes
can only be made using camera controls. See the camera manual for details.
Flash Sync Mode
This option controls the camera fl ash sync mode.
Sensitivity
Sensitivity (ISO equivalency) can be raised when taking photographs in low light conditions.
See the user’s manual provided with your camera for details.
Auto (D100/D2H only)
When this option is checked, the camera will adjust sensitivity (ISO equivalency) au to mat i cal ly
(ISO auto).