Manual

242
The Camera Control Window
Hue Adjustment (D1
X, D1H, D100, and D2 H only)
Use to modify hue while leaving brightness and chro ma un af fect ed. Adjustments can be
made in the range –9 ° to 9 °, with 0 ° rep re sent ing the original hues as recorded by the cam-
era (in D1-series cam er as, –9 ° is equiv a lent to a camera hue setting of 0, 0 ° to a setting of
3, and 9 ° to a setting of 6).
Noise Reduction (D100 and D2H only)
At shutter speeds slower than ½ s, “noise” in the form of randomly-spaced, brightly-col ored pixels
may appear in photographs, particularly in shadows. Check Noise Reduction to re duce noise.
Saving and Loading Camera Control Settings
The Camera Control option in the Set tings
menu is used to save Nikon Capture 4 Cam-
era Con trol set tings and to load and apply
previously saved settings.
Option De scrip tion
Load Camera
Settings…
Select this item to load camera settings previously saved us ing the Save Camera Set-
tings… op tion (see be low). A dialog will be dis played where you can navigate to the drive
(vol ume) and di rec to ry con tain ing the desired set tings fi le (only fi les with the extension
“.ncc” will be dis played). The settings in the Cam era Con trol window will in stant ly re vert
to the saved settings.
Save Camera
Settings…
Select this item to save the settings in the Camera Control window to a named fi le.
These settings can later be recalled using the Load Camera Settings… option.
Choos ing Save Camera Settings… displays a di a log where you can choose a des ti -
na tion and fi le name for current camera settings. Camera set tings are saved with
the ex ten sion “.ncc”.
The Image Processing Tab
The following settings can be adjusted from
the Image Pro cess ing tab:
Sharpening
This option controls how much the camera
sharp ens outlines. See the camera manual for
details.
Tone Comp
This setting controls contrast. See the cam-
era man u al for details.
Col or Mode (D1X, D1H, D100, and D2 H
only)
The D100, D1X, D1H, and D2H offer a choice of
col or modes. See the camera manual for de tails.
With the D1, colors are op ti mized for the NTSC
col or space, regardless of the op tion chosen for
color mode.
Controls displayed when D2H is
connected