Manual

192
The Camera Control Window
Macintosh
1
Connect the camera
Connect the camera to your computer and turn the camera on. If you are using a D1-
series camera, choose “PC” as the operating mode.
2
Close Nikon Transfer
If Nikon Transfer starts, click the Close button.
3
Start Nikon Capture 3 Camera Control
Double-click the Nikon Capture 3 Camera Control icon in the folder to which you
installed Nikon Capture 3.
The Camera Control window will be displayed.
Serial Number
If prompted to supply a serial number when starting Nikon View 5, Nikon Capture 3 Editor, or Nikon
Capture 3 Camera Control, enter the serial number for Nikon Capture 3.
Other Ways of Starting Camera Control
Nikon Capture 3 Editor can be started by double-clicking the Nikon Capture 3 Camera Control icon ( )
in the folder to which you installed Nikon Capture 3 (Windows, Mac OS 9). If Nikon Capture 3 was
registered in the Dock during installation, Mac OS X users will be able to start Nikon Capture 3 Editor by
clicking the Nikon Capture 3 Camera Control icon ( ) in the Dock.