Instruction Manual

En
Fr
En
Fr
De
Se
Ru
Fi
Cz
10
Mounting the sight
The P-TACTICAL SPUR reflex sight can be mounted on a Picatinny rail.
CAUTION
Make sure the firearm is unloaded. Use safe firearm handling practices at all times.
1. Use the included hex key to loosen the hex bolt.
2. Place the sight on the Picatinny rail.
3. Attach the mounting bracket as described in the illustration.
4. Tighten the hex bolt with the tightening torque of 15 to 20 lbf·in (1.7 to 2.3 N·m).
Reflex sight
Mounting bracket
Hex bolt
Picatinny rail
Make sure that the pointed
edge of the mounting bracket
is at the bottom.
Notice:
• If you fail to mount the sight properly, the sight may detach, causing accidents or other injury.
• The bolt may become loose due to recoil. Check the position of the tightness guide mark on the hex bolt before using the sight. If the position of the mark has
changed, tighten the bolt again.
Tightness guide mark
 Mounting options
To mount the sight on a handgun, you will need a separate handgun mount and replace the Picatinny rail mount. For more information about the handgun
mount, visit our website at www.NikonSportOptics.com.