Quick Start Guide (for customers in the Americas)

Shooting and Playback
15
En_01
Built-in Flash
In situations where a flash is needed, such
as in dark locations or when the subject is
backlit, lower the K (flash pop-up)
control to raise the flash.
• When not using the flash, gently push
to lower the flash until it clicks shut.
Switching Between the Monitor
and Viewfinder (x Button)
You can use the viewfinder when
bright light under the open sky makes it
difficult to see the monitor.
Each press of the x button switches
the display between the monitor and
viewfinder.
• When you fold the monitor against
the camera body with the screen
facing inward, the display in the
monitor is switched to the
viewfinder.
Diopter Adjustment of the
Viewfinder
When the image in the viewfinder is
difficult to see, adjust by rotating the
diopter adjustment control while
looking through the viewfinder.
• Take care not to scratch your eye
with your fingertips or nails.
Viewfinder
x (monitor) button
Diopter adjustment control