Quick Start Guide (for customers in the Americas)

First Steps

En_01

1.3 Plug the battery charger into an

electrical outlet.

• CHARGE lamp starts flashing when

charging starts.

• CHARGE lamp turns on when charging is

complete.

About 1 hour and 30 minutes are

required to charge a fully exhausted

battery.

1.4 When charging is complete, remove the battery and then

disconnect the battery charger from the electrical outlet.

Step 2 Attaching the Camera Strap

Step 3 Insert the Battery and the Memory Card

3.1 Open the battery-chamber/memory

card slot cover.

CHARGE

lamp

Attach the strap at two places.