Manualshelf

User's Manual

ManualsBrandsNikon ManualsCamera FlashSB-400
51525354555657585960
Reference information
En
30
Notes on continuous flash shooting
To prevent the SB-400 from overheating, allow the SB-400 to cool
down for at least 10 minutes after the maximum number of
continuous firings have been performed as shown in the table
below.
Max. number of continuous firings
Flash mode
Max. number of
continuous firings
i-TTL auto flash
Manual flash (Flash output level:
M1/1, M1/2)
15
Manual flash (Flash output level:
M1/4 to M1/128)
40
Do not exceed the maximum number of
continuous firings, as this may cause the flash
head to overheat and can result in burns and
damage to the flash panel and body.
CAUTION
Be careful when replacing batteries after
continuous flash use, because batteries may
generate heat during continuous flash
photography.
CAUTION