Operation Manual

104
TOP
Preferences— Preview Set tings
Option
Auto
ex po sure for
negative fi lm
If this item is checked (the default set ting), an autoex-
posure operation will be per formed as necessary be-
fore previewing fi lm negatives.
Auto
ex po sure for
pos i tive fi lm
If this item is checked (the default set ting), an autoex-
posure operation will be per formed as necessary be-
fore previewing fi lm pos i tives.
Auto focus
If this item is checked (the default set ting), an auto-
focus operation will be per formed as necessary when
the Preview button is clicked.
Multi
sampling
Check this item to perform multi-sample scanning
during preview (9000 ED, 8000 ED, 5000 ED, 4000
ED only). Multi-sample scanning will not be per-
formed if Normal (1×) is selected in the “Scanner Ex-
tras” palette. Selecting this option increases the time
needed to complete a preview, while the effects of
multi-sample scanning may not be visible in the pre-
view area at the normal zoom ratio.
Digital ICE
If this item is checked (the default option), the image
will be processed during preview to reduce the effects
of dust and scratches. This option only takes effect if
Enable Digital ICE is selected in the “Digital ICE
4
Ad-
vanced” palette. Selecting this option increases the
time needed to complete a preview.
Autofocus/Autoexposure
Autofocus/Autoexposure
If an autofocus or autoexposure operation has already been performed
on the current frame, it will not automatically be repeated before a
preview or scan. The autofocus and autoexposure buttons in the scan
window can be used to perform these operations manually if desired. If
Perform auto focus when fi lm is inserted is selected in the “Scanner
Extras” palette, an autofocus operation will au to mat i cal ly be per formed
when a slide is inserted in a slide-mount adapter (5000 ED, 4000 ED,
COOLSCAN V ED, COOLSCAN IV ED) or when a holder other than the
FH-869S or FH-869G is inserted in the 9000 ED or 8000 ED. As a re-
sult, an autofocus operation will not au to mat i cal ly be performed before
the image is scanned, even if Auto focus is selected in the “Preview
Settings” category. In the case of the 9000 ED and 8000 ED, this ap-
plies only to the fi rst frame in the holder; an autofocus operation will au-
tomatically be performed prior to scanning for all subsequent frames.
Description
Cache
preview
image for
single image
adapter
If this item is checked (the default option), Nikon Scan
will store the last preview created with the MA-21/
MA-20 (S) slide-mount adapter. This preview will be
displayed the next time the scan window is opened or
the MA-21/MA-20 (S) is inserted.