Operation Manual

29
TOP
The Scan Window — T he Sc an Bu tto n
Batch Scans
“Batch” scans allow a “batch” of multiple frames to be
scanned with a single click of the Scan button.
Using the Thumbnail Drawer
Batch scans can be performed with fi lm holders and adapters
that support thumbnail previews ( 23): all frames selected
in the thumbnail drawer are scanned when the Scan button
is clicked. The images can be scanned at the same settings,
or settings can be adjusted separately for each frame.
Multiple Frames, Same Settings
1. Select one frame in the thumbnail drawer.
2. Preview the image and adjust settings as desired.
3. Save changes to settings in the scan window settings
menu ( 17).
4. Select all the frames to be scanned in the thumbnail drawer.
5. Select the saved settings from the settings menu (if this
step is omitted, the settings in the scan window and Tool
Chest will apply only to the fi rst frame; the remaining
frames will be scanned at default settings).
6. Click the Scan button to scan the selected frames.
Multiple Frames, Different Settings
1. Select the frames to be scanned in the thumbnail drawer.
2. Preview the frames and adjust settings separately for each im-
age (use the thumbnail drawer to switch between frames).
3. Click the Scan button to scan the selected frames.
SF-210/SF-200 (S) Slide-Feeder Adapters
The slide feeder adapters available separately for the 5000
ED and 4000 ED also support batch scans, allowing a series
of slides to be scanned automatically at the same settings.
1. Preview the fi rst slide and adjust settings as desired.
2. Select the number slides to be scanned in the “Scanner
Extras” palette ( 76).
3. Click the Scan button to scan the slides at current set-
tings.
Batch Scan Settings
Batch Scan Settings
Settings in the scan window and Tool Chest will be reset to default val-
ues if the fi lm or holder is ejected before the Scan button is clicked.
Slide Feeder Adapters
Slide Feeder Adapters
Because slide feeder adapters do not support thumbnail previews, im-
ages can not be selected in the thumbnail drawer, nor can settings be
adjusted separately for each slide in a batch scan. To scan a series of
slides at different settings, preview and scan each slide separately.
“Preferences” > “Batch Scan”
“Preferences” > “Batch Scan”
The “Batch Scan” category ( 96) in the “Preferences” dialog contains
a variety of batch scan options.