Operation Manual

4
TOP
Read This First — Introduction
System Requirements
Nikon Scan must be installed before the scanner can be used to scan images. See the documentation provided with the
scanner for complete installation instructions. Before installing Nikon Scan, make sure that the computer satisfi es the fol-
lowing system requirements:
Windows
* More memory may be required depending on fi lm type, scan size, resolution, bit depth, the number of scans performed in each session, the
fi lm holder or adapter used, and on whether Digital ROC, Digital GEM or Digital DEE is used. A system with more than the minimum amount of
memory is recommended.
† More free disk space may be required depending on the fi lm type and number of frames. Nikon recommends having as much free disk space as
possible when running Nikon Scan.
‡ Depending on the type of interface installed, USB will operate at high speed (USB 2.0 only; maximum transfer rate 480 Mbps) or full speed (USB
1.1/USB 2.0; maximum transfer rate 12 Mbps). Windows XP and Windows 2000 Professional computers with a USB 2.0 interface support high-
speed USB. For more information, consult the manufacturer.
Additional information technical and support information may be available at the Nikon web sites listed in this manual ( 3).
Video resolution 800 × 600 pixels or more with 16-bit color (High Color) or more.
Hard-disk space
†
A minimum of 40 MB required for installation (200 MB recommended), with an additional 200 MB of free disk space avail-
able while Nikon Scan is running.
Miscellaneous CD-ROM drive required for installation.
RAM
*
128 MB or more (512 MB or more recommended)
OS Preinstalled versions of Windows XP, Windows 2000 Professional, Windows Me, Windows 98 SE
Interface Built-in USB 1.1/USB 2.0 ports
CPU 300 MHz Pentium or better
USB
‡
OHCI-compliant IEEE 1394 interface required.IEEE 1394