Operation Manual

74
TOP
The Tool Chest — Scanner Extras
Perform Autofocus When Film Is Inserted
If this option is selected when the
MA-21/MA-20 (S) slide-mount
adapter is inserted in the 5000
ED, 4000 ED, COOL SCAN V ED, or COOLSCAN IV ED, an
autofocus operation will automatically be performed when
a slide is inserted.
If this option is selected when
the 9000 ED or 8000 ED is con-
nected, an autofocus operation
will be performed on the fi rst frame when a fi lm holder is in-
serted (an autofocus operation will not be performed when
the FH-869S, FH-869G, or FH-869GR is inserted).
Calibration
If the scanner is left on for an extended
period, the temperature inside the scanner
will rise and the scanner may need to be
recalibrated. Click Calibrate to recalibrate
the scanner.
If the MA-21 or MA-20 (S) is inserted, remove any slides
from the adapter before recalibrating. Users of the IA-20
(S) will be prompted to rewind the fi lm before calibration
begins. Film will automatically be ejected from the SA-21,
SA-30, 9000 ED, or 8000 ED before calibration begins, and
will automatically be reloaded when calibration is complete.
The Status LED
The Status LED
The scanner status LED will blink while the scanner is being recalibrated.
Do not perform any additional operations in Nikon Scan until the status
LED has stopped blinking.