SnapBridge Connection Guide (for D‑SLR Cameras)
Pairing and Connecting
5
En_02
Pairing and Connecting
Before pairing, conrm that there is space available on the camera
memory card. To prevent unexpected interruptions, you should also
check that the camera battery is fully charged.
A D7500 camera and Android smart device are used for illustrative
purposes in the instructions that follow.
1
Camera: Select Connect to smart device in the setup menu,
then highlight Start and press J.
1
2
Camera: Press J when the following
message is displayed.
2, 3
1 If the camera displays the message shown in Step 2 when rst turned on,
you can skip this step and proceed to Step 2.
2 If this message is not displayed, proceed to Step 3.
3 Some cameras may prompt you to connect using NFC. Press J to proceed
without using NFC. More information may be found under “More on Pairing
and Connecting” (0 13).