SnapBridge Connection Guide (for KeyMission 80)

ManualsBrandsNikon ManualsMobile AppSnapBridge

-1-

Table of Contents

Installing the SnapBridge app................................................................................................ 2

Connecting the Camera and a Smart Device....................................................................3

Image Upload and Remote Photography..........................................................................7

Troubleshooting.......................................................................................................................... 9

This document describes the procedure for using the SnapBridge app

(Version 2.0) to establish a wireless connection between KeyMission 80

and smart device.

When you establish a wireless connection between KeyMission 80 and

smart device, you can upload images captured with the camera to the

smart device, or use the smart device to release the camera shutter (page 7).

• Use the latest version of the SnapBridge app and camera firmware. You can

download the latest camera firmware from the Nikon Download Center. The

operating procedures may vary depending on the camera firmware, version of the

SnapBridge app, or OS of the smart device.

Connection Guide

(for KeyMission 80)

Summary of content (11 pages)

PAGE 1
Connection Guide (for KeyMission 80) Table of Contents Installing the SnapBridge app ................................................................................................ 2 Connecting the Camera and a Smart Device.................................................................... 3 Image Upload and Remote Photography .......................................................................... 7 Troubleshooting.........................................................................................
PAGE 2
Installing the SnapBridge app 1 Install the SnapBridge app on the smart device. • Download the app from the Apple App Store® for iOS, and from Google Play™ for Android™. Search for “snapbridge” and then install it. • Visit the applicable download site for more information about supported OS versions. • The “SnapBridge 360/170 app” cannot be used with KeyMission 80. 2 Enable Bluetooth and Wi-Fi on the smart device. • Use the SnapBridge app to connect to the camera.
PAGE 3
Connecting the Camera and a Smart Device • Check that the camera is sufficiently charged so that it does not turn off during the procedure. • Insert a memory card with sufficient free space into the camera. • See the documentation provided with the camera for details on how to use it. 1 Camera: Press the shutter-release button or d (menu) button to turn on the camera.
PAGE 4
3 Camera: Scroll down the screen, and select Set when the dialog on the right is displayed. 15:30 and set SnapBridge later from the Network menu, select Later. Set Later • A dialog prompting you whether to use the NFC function is displayed. If you will use the NFC function, touch the NFC antenna of the smart device to Y (N-mark) on the camera. When Start pairing? is displayed on the smart device, tap OK and proceed to step 8. If you will not use the NFC function, scroll down the screen and select Next.
PAGE 5
6 Smart device: In the Pair with camera screen, tap the camera name. • For iOS, if a dialog explaining the procedure is displayed when connecting, confirm the details and tap Understood (if it is not displayed, scroll down the screen). Tap the camera name again when the screen to select an accessory is displayed (it may take some time for the camera name to be displayed.).
PAGE 6
10 Camera: Follow the on-screen instructions to complete the setup process. • To record location data with photographs, select Yes when prompted and enable the location data features. Enable location data features on the smart device, and in the A tab of the SnapBridge app M Auto link options M enable Synchronize location data. • You can synchronize the camera clock to the time reported by the smart device by selecting Yes when prompted.
PAGE 7
Image Upload and Remote Photography Image Upload There are three ways to upload images. Automatically upload images to the smart device every time they are captured1, 2 Press the d button on the camera, z setup menu M Camera settings M Network menu M Send pictures while shooting M set Still images to On. Movies cannot be uploaded automatically.
PAGE 8
Remote Photography You can tap the A tab in the SnapBridge app M Remote photography to release the camera shutter using a smart device. • Follow the instructions in the SnapBridge app to switch to a Wi-Fi connection. In iOS, a dialog related to Wi-Fi connections may be displayed. In such a case, see “If a Dialog Related to Wi-Fi Connections Is Displayed in iOS” (page 8).
PAGE 9
Troubleshooting If the Connection Is Unsuccessful • If the camera displays Could not connect. when connecting - Select Reconnect and repeat the procedure from step 3 (page 4) in “Connecting the Camera and a Smart Device” to connect again. - Select Cancel to cancel the connection. • Turn the camera off and then on again. • The issue may be solved by relaunching the app. Close the SnapBridge app completely and then tap the app icon again to launch it.
PAGE 10
If Images Cannot Be Uploaded Successfully • If the connection is disconnected while uploading images through the Send pictures while shooting or j upload reservation function in the camera, the connection and image upload may resume when you turn the camera off and then on again. • You may be able to upload by canceling the connection and then establishing a connection again.
PAGE 11
If Remote Photography Cannot Be Performed • You cannot perform remote photography when a memory card is not inserted into the camera. Insert a memory card. • You may not be able to use remote photography while the camera is operating. • You may not be able to use remote photography in the following situations.