User manual

260 B The Setup Menu: Camera Setup

When connecting the camera to a television or VCR, be sure the

camera video mode matches the device video standard (NTSC or

PAL).

Choose whether the camera will establish wireless connections

with smart devices when an optional WU-1a wireless mobile

adapter (0 309) is attached to the camera USB and A/V

connector.

The Satellite Signal Indicator

Connection status is shown as follows:

• % (static): Location data acquired.

• % (flashing): The unit is searching for a

signal.

Pictures taken while the icon is

flashing do not include location data.

• No icon: No new location data have been

received from the unit for at least two

seconds.

Pictures taken when the % icon is

not displayed do not include location data.

Video Mode

G button ➜ B setup menu

Wireless Mobile Adapter

G button ➜ B setup menu

Option Description

Enable

Enable wireless connections to smart devices running the

Wireless Mobile Utility.

Disable

Disable wireless connections to smart devices.

Choose

this option in locations where the use of wireless devices

is prohibited.

Selecting this option also reduces the drain

on the camera battery.