User manual

23Introduction
A
Removing Memory Cards
After confirming that the memory card
access lamp is off, turn the camera off, open
the memory card slot cover, and press the
card in to eject it (q).
The card can then be
removed by hand (w).
A The Write Protect Switch
SD memory cards are equipped
with a write protect switch to
prevent accidental loss of data.
When this switch is in the “lock”
position, the memory card can not
be formatted and photos can not
be deleted or recorded (a beep will sound if you attempt to release the
shutter).
To unlock the memory card, slide the switch to the “write”
position.
A A-M, M/A-M, and A/M-M Switches
When using autofocus with a lens equipped
with an A-M mode switch, slide the switch to
A (if the lens has an M/A-M or A/M-M switch,
select M/A or A/M).
For information on other
lenses that can be used with this camera, see
page 289.
A Vibration Reduction (VR)
Vibration reduction can be enabled by
selecting On for Optical VR in the shooting
menu (0 230), if the lens supports this
option, or by sliding the lens vibration
reduction switch to ON, if the lens is
equipped with a vibration reduction switch.
A vibration reduction indicator appears in
the information display when vibration
reduction is on.
Write-protect switch
16
GB