User manual

47
Shooting Features
Flash Mode
When the flash is raised, the flash mode can be set according to shooting conditions.
1 Press the m (flash pop-up) button to raise
the flash.
• When the flash is lowered, flash operation is disabled
and W is displayed.
2 Press the multi selector H (X).
3 Select the desired flash mode (A48)
and press the k button.
• If the setting is not applied by pressing the
k button, the selection will be canceled.
C The Flash Lamp
• The status of the flash can be confirmed by pressing the
shutter-release button halfway.
- On: The flash fires when you press the shutter-release
button all the way down.
- Flashing: The flash is charging. The camera cannot shoot
images.
- Off: The flash does not fire when a picture is taken.
• If the battery level is low, the screen turns off while the flash is charging.
Flash Mode
Auto