Portable Projector VT695/VT595/VT590/VT491/VT59/VT49 User’s Manual
© NEC Display Solutions, Ltd. 2006-2007 3rd edition April 2007 • IBM is a trademark or registered trademark of International Business Machines Corporation. • Macintosh, Mac OS X and PowerBook are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. • Windows, Windows 98, Windows Me, Windows XP or Windows 2000 are trademarks or registered trademarks of Microsoft Corporation.
Important Information Safety Cautions Precautions Please read this manual carefully before using your NEC VT695/VT595/VT590/VT491/VT59/VT49 projector and keep the manual handy for future reference. Your serial number is located on the bottom of your projector. Record it here: CAUTION To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible.
Important Information WARNING TO CALIFORNIA RESIDENTS: Handling the cables supplied with this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. WASH HANDS AFTER HANDLING. RF Interference (for USA only) WARNING The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Display Solutions of America, Inc. in this manual.
Important Information Place the projector in a horizontal position The tilt angle of the projector should not exceed 10 degrees, nor should the projector be installed in any way other than the desktop and ceiling mount, otherwise lamp life could decrease dramatically. 10° Fire and Shock Precautions • Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the build-up of heat inside your projector. Allow at least 4 inches (10cm) of space between your projector and a wall.
Important Information CAUTION • Do not use the tilt-foot for purposes other than originally intended. Misuses such as gripping the tilt-foot or hanging on the wall can cause damage to the projector. • Do not send the projector in the soft case by parcel delivery service or cargo shipment. The projector inside the soft case could be damaged. • When carrying the projector by the carrying handle, make sure the two screws that attach the carrying handle to the projector cabinet are tight.
Table of Contents Important Information ----------------------------------------------------------- i 1.
Table of Contents 4.
1. Introduction What's in the Box? Make sure your box contains everything listed. If any pieces are missing, contact your dealer. Please save the original box and packing materials if you ever need to ship your projector. SO UR CE AU TO AD J.
1. Introduction Introduction to the Projector This section introduces you to your new projector and describes the features and controls. Congratulations on Your Purchase of the Projector This projector is one of the very best projectors available today. The projector enables you to project precise images up to 300 inches across (measured diagonally) from your PC or Macintosh computer (desktop or notebook), VCR, DVD player, document camera, or a laser disc player.
1. Introduction Part Names of the Projector Front/Top Controls (→ page 5) SO UR CE C FO US AU TO AD J.
1. Introduction Bottom Rear Foot (Left / Right) (→ page 23) Adjustable Tilt Foot (→ page 23) Adjustable Tilt Foot Button (→ page 23) Lamp Cover (→ page 52) Attaching the supplied carrying handle (VT695, VT595, VT590 and VT491 only) You can carry the projector by attaching the supplied carrying handle securely to the projector. To attach the supplied carrying handle, use a Phillips-head screwdriver and the supplied two screws.
1. Introduction Top Features 1 8 7 MENU SELECT 10 IT EX R 2 TE EN LAMP STATUS 9 POWER ON/STAND BY 3 SOURCE AUTO ADJ. 5 6 4 1. LAMP Indicator (→page 52,55) 2. STATUS Indicator (→page 55) 3. POWER Indicator (→page 20,28,55) 4. POWER Button (ON / STAND BY) ( ) (→page 20,28) 5. SOURCE Button (→page 22) 6. AUTO ADJ. Button (→page 27) 7. MENU Button (→page 36) 8. SELECT / Volume Buttons / Keystone Buttons (→page 25,27) 9. ENTER Button 10.
1. Introduction Terminal Panel Features 5 VT695/VT595 8 S-VIDEO IN VIDEO IN L AUDIO OUT MONITOR OUT (COMP 1) 3 2 4 1 8 4 PC CONTROL MONITOR OUT(COMP 1) AUDIO IN COMPUTER 1 IN AUDIO OUT COMPUTER 2 IN R S-VIDEO IN L VIDEO IN 1 COMPUTER 1 IN AUDIO IN 6 7 5 VT590/VT59/VT49 2 AUDIO IN R S-VIDEO IN VIDEO IN 9 COMPUTER 2 (DVI-I) IN AUDIO IN 6 7 5 VT491 PC CTRL L 3 8 PC CONTROL 4 MONITOR OUT R AUDIO IN 6 7 1.
1. Introduction Part Names of the Remote Control 1 OFF ON 3 2 POWER MAGNIFY PIC-MUTE PAGE UP 4 6 DOWN 5 7 MENU 8 9 ENTER EXIT L-CLICK R-CLICK 11 13 14 19 17 12 MOUSE VIDEO COMPUTER COMPUTER AUTO ADJ. 1 S-VIDEO LAMP MODE 2 VOLUME 10 ASPECT HELP PICTURE FREEZE 16 15 18 21 22 20 12. MOUSE R-CLICK Button* (→ page 34,35) 13. VIDEO Button (→ page 22) 1. Infrared Transmitter (→ page 8) 14. S-VIDEO Button (→ page 22) 2. POWER ON Button (→ page 20) 15.
1. Introduction Battery Installation 1 Press firmly and slide the 2 Install new batteries (AAA). Ensure that you have the batteries' polarity (+/–) aligned correctly. battery cover off. 3 Slip the cover back over the batteries until it snaps into place. Do not mix different types of batteries or new and old batteries. Remote Control Precautions • • • • • • • • Handle the remote control carefully. If the remote control gets wet, wipe it dry immediately. Avoid excessive heat and humidity.
2. Installation and Connections This section describes how to set up your projector and how to connect video and audio sources. Your projector is simple to set up and use. But before you get started, you must first: 1 Set up a screen and the projector. 2 Connect your computer or video equipment to the projector. (→ page 13,14,15,16,17,18) FOCUS ZOOM MENU 3 Connect the supplied power cable. (→ page 19) T S POWER STATU ENTER LAMP SELEC EXIT ON/STAN D BY SOURCE AUTO ADJ.
2. Installation and Connections Selecting a Location (VT595/VT590/VT491/VT59) The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is approximately 21" (0.53 m) measured diagonally when the projector is roughly 30 inches (0.8 m) from the wall or screen. The largest the image can be is 300" (7.6 m) when the projector is about 400 inches (10 m) from the wall or screen. Screen Size (Unit: cm/inch) 609.6(W) 457.
2. Installation and Connections Throw Distance and Screen Size The following shows the proper relative positions of the projector and screen. Refer to the table to determine the position of installation. Distance Chart B B = Vertical distance between lens center and screen center C = Throw distance D = Vertical distance between lens center and screen bottom (top of screen for ceiling application) α = Throw angle D NOTE: Distances may vary +/-5%.
2.
2. Installation and Connections Making Connections NOTE: When using with a notebook PC, be sure to connect the projector and notebook PC while the projector is in standby mode and before turning on the power to the notebook PC. In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered up. * If the screen goes blank while using your remote control, it may be the result of the computer's screen-saver or power management software.
2. Installation and Connections When Viewing a DVI Digital Signal (VT695/VT595) To project a DVI digital signal, be sure to connect the PC and the projector using a DVI cable (not supplied) before turning on your PC or projector. Turn on the projector first and select Computer 2 (Digital) from the source menu before turning on your PC. Failure to do so may not activate the digital output of the graphics card resulting in no picture being displayed. Should this happen, restart your PC.
2. Installation and Connections Using Two Analog COMPUTER Inputs Simultaneously (VT695/VT595) If you need to use two analog COMPUTER inputs simultaneously, connect a VGA signal cable as shown below.
2.
2.
2. Installation and Connections Connecting Your VCR or Laser Disc Player AUDIO IN S-VIDEO IN S-VIDEO IN L VIDEO IN PC CTRL COMPUTER 2 (DVI-I) IN AUDIO IN COMPUTER 1 IN AUDIO OUT MONITOR OUT (COMP 1) R AUDIO IN VIDEO IN The above drawing is for VT695/VT595. The layout except VIDEO, S-VIDEO and AUDIO connectors may differ slightly from that shown in this drawing depending on the model.
2. Installation and Connections Connecting the Supplied Power Cable Connect the supplied power cable to the projector. First connect the supplied power cable's two-pin plug to the AC IN of the projector, and then connect the other plug of the supplied power cable in the wall outlet. F O C U S Z O M O M EN U SE CT AT TE ST P LE M EN LA W R PO US ER EXIT ON /S TA ND BY SO UR CE AU TO AD J. To wall outlet ← Make sure that the prongs are fully inserted into both the AC IN and the wall outlet.
3. Projecting an Image (Basic Operation) This section describes how to turn on the projector and to project a picture onto the screen. Turning on the Projector NOTE: • The projector has two power switches: a main power switch and a POWER (ON/STAND BY) button (POWER ON and OFF on the remote control). • When plugging in or unplugging the supplied power cable, make sure that the main power switch is pushed to the off ( ) position. Failure to do so may cause damage to the projector. LAMP 1.
3. Projecting an Image (Basic Operation) Note on Startup screen (Menu Language Select screen) When you first turn on the projector, you will get the Startup menu. This menu gives you the opportunity to select one of the 8 menu languages. To select a menu language, follow these steps: 1. Use the SELECT or button to select one of the 8 languages from the menu. MENU OFF ON POWER MAGNIFY PIC-MUTE UP SELECT 2 1 EN DOWN IT EX TE LAMP PAGE R STATUS MENU POWER 2 ON/STAND BY SOURCE AUTO ADJ.
3. Projecting an Image (Basic Operation) Selecting a Source Selecting the computer or video source NOTE: Turn on the computer or video source equipment connected to the projector. Selecting from Source List MENU SELECT IT EX TE LAMP EN R Press and quickly release the SOURCE button on the projector cabinet to display the Source list.
3. Projecting an Image (Basic Operation) Adjusting the Picture Size and Position Place your projector on a flat level surface and ensure that the projector is square to the screen. FOCU Lift the front edge of the projector to center the image vertically. * If the projected image does not appear square to the screen then use the Keystone feature for proper adjustment. (→ page 25) S M ZOO MEN U US STAT ER POW CT P ENTER LAM SELE EXIT ON/ST AND BY SOURC E AUTO ADJ.
3. Projecting an Image (Basic Operation) Zoom VT695/VT595/VT590/VT491/VT59 VT695/VT595/VT590/VT491/VT59 SO UR CE AU TO AD J. Use the ZOOM lever to adjust the image size on the screen. F O C U S ZO M O LA M P ST ATU S PO W ER M EN U ENTER SE LE ON CT /S TA ND BY EXIT VT49 VT49 Use the Digital ZOOM button on the projector cabinet to electronically enlarge or reduce the image size. NOTE: Digital Zoom can result in a blurry image due to the electronic zoom.
3. Projecting an Image (Basic Operation) Correcting Keystone Distortion Correcting Keystone Distortion If the screen is tilted vertically, keystone distortion becomes large. Proceed with the following steps to correct keystone distortion NOTE: The Keystone correction can cause an image to be slightly blurred because the correction is made electronically. NOTE: The Keystone correction range can be made narrower, depending on a signal or its aspect ratio selection.
3. Projecting an Image (Basic Operation) Adjusting with the Auto Keystone Function (VT695 and VT595 only) The Auto Keystone correction feature will correct the vertical distortion of a projected image on the screen. No special operation required. Just put the projector on a flat surface. TIP: Even when the menu setting for [Auto Keystone] is turned on, [Keystone] can be adjusted manually. To turn on [Auto Keystone], proceed the following steps. 1. Press the MENU button The menu will be displayed. 2.
3. Projecting an Image (Basic Operation) Optimizing RGB Picture Automatically Adjusting the Image Using Auto Adjust Optimizing an RGB image automatically. Press the AUTO ADJ. button to optimize an RGB image automatically. This adjustment may be necessary when you connect your computer for the first time. [Poor picture] MENU L-CLICK R-CLICK VIDEO COMPUTER AUTO ADJ.
3. Projecting an Image (Basic Operation) Turning off the Projector To turn off the projector: MENU OFF ON POWER MAGNIFY PIC-MUTE SELECT LAMP R TE EN 1. First, press the POWER (ON/STAND BY) button on the projector cabinet or the POWER OFF button on the remote control. The [Power Off / Are you sure?] message will appear. PAGE UP DOWN IT EX STATUS MENU POWER ON/STAND BY SOURCE AUTO ADJ. ENTER Power On 2.
3. Projecting an Image (Basic Operation) After Use Preparation: Make sure that the projector is turned off. 1. Unplug the power cable. 2. Disconnect any other cables. 3. Retract adjustable tilt feet if extended. 4. Cover the lens with the lens cap. 5. Put the projector and accessories in the supplied soft case. Place the projector in the soft case with the lens facing upward as shown below. This is to prevent the lens from damage.
4. Convenient Features 쐃 Turning off the Image and Sound Press the PIC-MUTE button to turn off the image and sound for a short period of time. Press again to restore the image and sound. OFF ON POWER MAGNIFY PIC-MUTE PAGE UP DOWN NOTE: Sound from the AUDIO OUT jack (Stereo mini) on the VT695/VT595/VT491 can be turned off. MENU ENTER EXIT 쐇 Freezing a Picture Press the FREEZE button to freeze a picture. Press again to resume motion.
4. Convenient Features Changing Lamp Mode This feature enables you to select two brightness modes of the lamp: Normal and Eco modes. The lamp life can be extended by using the Eco mode. Lamp Mode Description Status of LAMP indicator Normal Mode This is the default setting (100% Brightness). Off Select this mode to increase the lamp life (approx. 80% Brightness). *approx.
4. Convenient Features 5. Use the SELECT or button to select [On] and press the ENTER button. The [Security Keyword] screen will be displayed. 6. Type in a combination of the four SELECT buttons and press the ENTER button. NOTE: A keyword must be 4 to 10 digits in length. Please make a note of your keyword. The [Confirm Keyword] screen will be displayed. NOTE: Do not forget your keyword.
4. Convenient Features To turn on the projector when Security is enabled: 1. Press the Main Power Switch to the On position (I). 2. Press and hold the POWER ON or the ON/STAND BY button for a minimum of 1 second. The projector will be turned on and display a message to the effect that the projector is security-protected. 3. Press the MENU button. The Security Keyword screen will be displayed. 4. Enter your keyword in the Security Keyword screen and press the ENTER button. You can view the projected image.
4. Convenient Features Using the Optional Remote Mouse Receiver (NP01MR) The optional remote mouse receiver enables you to operate your computer’s mouse functions from the remote control. It is a great convenience for clicking through your computer-generated presentations. Connecting the remote mouse receiver to your computer If you wish to use the remote mouse function, connect the mouse receiver and computer. The mouse receiver can be connected directly to the computer’s USB port (type A).
4. Convenient Features Operating your computer’s mouse from the remote control You can operate your computer's mouse from the remote control. PAGE UP/DOWN Button: scrolls the viewing area of the window or to move to the previous or next slide in PowerPoint on your computer. SELECT Buttons: moves the mouse cursor on your computer. MOUSE L-CLICK Button: works as the mouse left button. MOUSE R-CLICK Button: works as the mouse right button.
5. Using On-Screen Menu Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected. 1. Press the MENU button on the remote control or projector cabinet to display the Menu. OFF ON POWER MAGNIFY PIC-MUTE PAGE UP DOWN MENU ENTER EXIT 2. Press the SELECT or button on the remote control or the projector cabinet to highlight the menu for the item you want to adjust or set.
5. Using On-Screen Menu 4. Use the SELECT or button on the remote control or the projector cabinet to select the item you want to adjust or set. 5. Adjusting the level of a selected item or selecting an item. Slide bar Solid triangle OFF ON POWER MAGNIFY PIC-MUTE PAGE UP DOWN MENU ENTER EXIT Radio button OFF ON POWER MAGNIFY PIC-MUTE PAGE UP DOWN MENU For Adjusting items (Slide bar) Slide bar .......... Indicates settings or the direction of adjustment.
5. Using On-Screen Menu 쐇 Menu Elements Title Slide bar Highlight Source Off Timer remaining time Radio button Solid triangle Check mark Tab Thermometer symbol Key Lock symbol Menu windows or dialog boxes typically have the following elements: Title .......................................... Indicates the menu title. Highlight ................................... Indicates the selected menu or item. Source ...................................... Indicates the currently selected source.
5.
5. Using On-Screen Menu Signal Select Computer 1 (VT695/VT595/VT491) Computer 2 (Analog) (VT695/VT595) Computer 2 (VT491) Computer (VT590/VT59/VT49) Video RGB/ Component RGB/ Component RGB/ Component RGB/ Component Auto S-Video Auto Deinterlace Information Usage Time Source Version Reset On RGB/Component, RGB, Component Yes RGB/Component, RGB, Component Yes RGB/Component, RGB, Component Yes RGB/Component, RGB, Component Yes Auto, NTSC3.58, NTSC4.
5. Using On-Screen Menu 쐏 Menu Descriptions & Functions [Picture] Preset When selecting user adjustable [Preset], the submenu will be displayed. You can customize each gamma or color. To do so, first select [Preset] and press the ENTER button, then proceed using the following steps. Detail Settings Selecting Reference Setting [Reference] This option allows you to adjust neutral tint for yellow, cyan or magenta.
5. Using On-Screen Menu Adjusting White Balance [White Balance] This allows you to adjust the white balance. Contrast for each color (RGB) to adjust the white level of the screen; Brightness for each color (RGB) is used to adjust the black level of the screen. Adjusting Contrast, Brightness, Sharpness, Color and Hue You can adjust contrast, brightness, sharpness, color and hue. Contrast ................ Adjusts the intensity of the image according to the incoming signal (White level of the image).
5. Using On-Screen Menu NOTE: • When you are displaying an RGB image with a higher resolution than the projector’s native resolution, the image will be displayed in the projector’s native resolution. In this case [Native] is not available from the menu. Only when displaying an RGB image with a lower resolution than the projector's native resolution, will the image be able to be displayed in its true resolution [Native].
5. Using On-Screen Menu 쐂 Menu Descriptions & Functions [Setup] [General] VT695/VT595 VT590/VT491/VT59/VT49 Computer: VT590/VT59/VT49 Computer 1: VT491 Enabling Auto Keystone [Auto Keystone] (VT695/VT595 only) This feature allows the projector to detect its tilt and correct vertical distortion automatically. To turn on the Auto Keystone feature, select [On]. Correcting Vertical Keystone Distortion Manually [Keystone] You can correct vertical distortion manually.
5. Using On-Screen Menu [Installation] Selecting Projector Orientation [Orientation] This sets your image for your type of projection application. The options are: desktop front projection, ceiling rear projection, desktop rear projection, and ceiling front projection. Desktop front Ceiling rear Desktop rear Ceiling front Selecting Communication Speed [Communication Speed] This feature sets the baud rate of the PC Control port (Mini DIN 8 Pin). It supports data rates from 4800 to 19200 bps.
5. Using On-Screen Menu Enabling Security [Security] This feature turns on or off the Security function. Unless the correct keyword is entered, the projector cannot project an image. (→page 31) Selecting Menu Color [Menu Color Select] You can choose between two color modes for menu color: color and monochrome. Selecting Menu Display Time [Menu Display Time] This option allows you to select how long the projector waits after the last touch of a button to turn off the menu.
5. Using On-Screen Menu Enabling Fan Speed Mode [Fan Mode] This option allows you to select two modes for fan speed: Auto mode and High speed mode. Auto ...................... The built-in fans automatically run at a variable speed according to the internal temperature. High ...................... The built-in fans run at a fixed high speed. When you wish to cool down the temperature inside the projector quickly, select [High].
5. Using On-Screen Menu 쐆 Menu Descriptions & Functions [Information] Displays the status of the current signal and lamp usage. This item has three pages. The information included is as follows: [Usage Time] [Lamp Life Remaining] (%)* [Lamp Hours Used] (H) [Filter Hours Used] (H) * The progress indicator shows the percentage of remaining bulb life. The value informs you of the amount of lamp usage.
5. Using On-Screen Menu [Version] [Product] [Serial Number] [Firmware] Version [Data] Version Menu Descriptions & Functions [Reset] Returning to Factory Default [Reset] The Factory Default feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except the following: [Current Signal] Resets the adjustments for the current signal to the factory preset levels.
6. Maintenance This section describes the simple maintenance procedures you should follow to clean the filters and replace the lamp. Cleaning or Replacing the Filters The air-filter sponge keeps dust and dirt from getting inside the projector and should be cleaned after every 100 hours of operation (more often in dusty conditions). If the filter is dirty or clogged, your projector may overheat.
6. Maintenance 3. Reinstall the new filter cover. 4. Clear the filter hours used. To reset the filter usage time, from the menu, select [Reset] → [Clear Filter Hours]. (→page 49 for resetting the filter usage time.) NOTE: Do not wash the filter with soap and water. Soap and water will damage the filter membrane. Before replacing the filter, remove dust and dirt from the projector cabinet. Keep out dust and dirt during filter replacement.
6. Maintenance 쐋 Replacing the Lamp After your lamp has been operating for 2000*1 hours (up to 3000*1 hours in Eco mode) or longer, the LAMP indicator in the cabinet will blink red and the message [The lamp has reached the end of its usable life. Please replace the lamp.] *2 will appear. Even though the lamp may still be working, replace it at 2000*1 (up to 3000*1 hours in Eco mode) hours to maintain optimal projector performance. After replacing the lamp, be sure to clear the lamp hour meter.
6. Maintenance 2. Remove the lamp cover. (1)Press firmly and slide the lamp cover by 1 cm (0.4”) • Do not force to pull the lamp cover (2)Push to release two catches on both sides and slide the lamp cover off. 1 3 1 2 3. Remove the lamp housing. (1)Loosen the two screws securing the lamp housing until the phillips screwdriver goes into a freewheeling condition. The two screws are not removable. (2)Remove the lamp housing by holding it.
6. Maintenance 4. Install a new lamp housing. (1)Insert a new lamp housing until the lamp housing is plugged into the socket. CAUTION Do not use a lamp other than the NEC replacement lamp VT85LP (VT695/VT595/VT590/VT491) or VT80LP (VT59/VT49). Order this from your NEC dealer. (2)Secure it in place with the two screws. Be sure to tighten the screws. 5. Reattach the lamp cover. (1)Place the lamp cover, aligning it with the guiding line. (2)Slide the lamp cover back until it snaps into place. 6.
7. Appendix Troubleshooting This section helps you resolve problems you may encounter while setting up or using the projector. Indicator Messages Power Indicator Indicator Condition Projector Condition Off Blinking light Green 0.5 sec On, 0.5 sec Off 2.5 sec On, 0.5 sec Off 0.5 sec On, 0.5 sec Off Orange Steady light Green Orange Note The main power is off – The projector is getting ready to turn on. Wait for a moment. Off Timer is enabled. – The projector is cooling down. Wait for a moment.
7. Appendix Common Problems & Solutions (→ "Power/Status/Lamp Indicator" on page 55.) Problem Check These Items Does not turn on • Check that the power cable is plugged in and that the power button on the projector cabinet or the remote control is on. (→ pages 19 and 20) • Ensure that the lamp cover is installed correctly. (→ page 54) • Check to see if the projector has overheated.
7. Appendix If there is no picture, or the picture is not displayed correctly. • Power on process for the projector and the PC. Be sure to connect the projector and notebook PC while the projector is in standby mode and before turning on the power to the notebook PC. In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered up. NOTE: You can check the horizontal frequency of the current signal in the projector’s menu under Information.
7. Appendix Specifications This section provides technical information about the VT695/VT595/VT590/VT491/VT59/VT49 projector's performance. Model Number Optical LCD Panel Resolution Lens Lamp Light Output** Contrast Ratio Image Size (Diagonal) Projection Distance Projection Angle Keystone Correction Electrical Inputs Outputs Video Compatibility Scan Rate Video Bandwidth Color Reproduction VT695/VT595/VT590/VT491/VT59/VT49 VT695: 0.
7. Appendix Horizontal Resolution External Control Sync Compatibility Built-in Speaker Power Requirement Input Current Power Consumption NTSC / NTSC4.43/PAL/PAL-M/PAL-N/PAL60: 540 TV lines SECAM: 300 TV lines RGB: VT695/VT595/VT590/VT59: 1024 dots (H) 768 dots (V), VT491/VT49: 800 dots (H) 600 dots (V) RS232, IR Separate Sync / Composite Sync / Sync on Green / Sync on Video VT695/VT595: 5W (monaural) VT590/VT491/VT59/VT49: 1W (monaural) 100 - 240V AC, 50 / 60 Hz VT695/VT595/VT590/VT491: 3.1 - 1.
7. Appendix Regulations VT695/VT595/VT590/VT491/VT49: For United States: UL Approved (UL 60950 - 1) Meets FCC Class B requirements For Canada: UL Approved (CSA 60950 - 1) Meets DOC Canada Class B requirements For Australia/New Zealand: Meets AS/NZS CISPR.
7. Appendix Cabinet Dimensions Although the appearance is slightly different, the VT695, VT595, VT590, VT491, VT59 and VT49 are the same in dimensions. VIDEO IN AUDIO IN R AUDIO OUT S-VIDEO IN L PC CTRL COMPUTER 2 (DVI-I) IN AUDIO IN MONITOR OUT (COMP 1) COMPUTER 1 IN ON/STAN D SOURCE BY POWER AUTO STATUS ADJ. LAMP ENTER SELECT E X IT ON/STAND BYSOURCE AUTO ADJ. POWER LAMP R TE EN STATUS IT EX 258.3 (10.2") SELECT MENU ZOOM FOCUS Lens center 308.7 (12.2") 71.35 (2.8") 120.8 (4.
7. Appendix Pin Assignments of D-Sub COMPUTER Input Connector Mini D-Sub 15 Pin Connector 6 11 12 13 14 15 7 8 9 10 1 2 3 4 5 Signal Level Video signal : 0.7Vp-p (Analog) Sync signal : TTL level Pin No.
7.
7.
7. Appendix PC Control Connector (DIN-8P) To TxD of PC To GND of PC 1 3 4 6 7 2 5 8 To RxD of PC NOTE: Pins 2, 3, 5, 6 and 8 are used inside the projector.
7. Appendix Troubleshooting Check List Before contacting your dealer or service personnel, check the following list to be sure repairs are needed also by referring to the “Troubleshooting” section in your user’s manual. This checklist below will help us solve your problem more efficiently. * Print this page and the next page for your check.
7. Appendix In the space below please describe your problem in detail. Information on application and environment where your projector is used Installation environment Projector Model number: Screen size: Serial No.
7. Appendix TravelCare Guide 5) Problems or damage caused by use in hot or humid places, in vehicles, boats or ships, etc. TravelCare - a service for international travelers 6) Problems or damage caused by expendable supplies or devices connected to the product other than those designated by NEC. This product is eligible for "TravelCare", NEC's unique international warranty. Please note that TravelCare coverage differs in part from coverage under the warranty included with the product.
7. Appendix WEB Address: http://www.nec.com.au Hyosung ITX Co., Ltd. Address: 2nd Fl., Ire B/D. #2, 4Ga, Yangpyeng-Dong, Youngdeungpo-Gu, Seoul, Korea 150-967 Telephone: +82 2 2163 4193 Fax Line: +82 2 2163 4196 Email Address: moneybear@hyosung.com (Regions Covered) Australia*, New Zealand In Asia and Middle East NEC Display Solutions, Ltd. Address: 686-1, Nishioi, Oi-Machi, Ashigarakami-Gun, Kanagawa 258-0017, Japan Telephone: +81 465 85 2369 Fax Line: +81 465 85 2393 Email Address: support_pjweb@nevt.
7. Appendix Date: / / P-1/ , , TO: NEC or NEC's Authorized Service Station: FM: (Company & Name with signature) Dear Sir (s), I would like to apply your TravelCare Service Program based on attached registration and qualification sheet and agree with your following conditions, and also the Service fee will be charged to my credit card account, if I don't return the Loan units within the specified period. I also confirm following information is correct. Regards.
7. Appendix 5. Loan Service Charges and Conditions: Upon acceptance of this NEC Projector, Customer agrees to assume liability for this loan unit. Condition of your TravelCare Service Program Enduser is requested to understand following condition of TravelCare Service Program and complete the necessary information on the application sheet. The current cost of use of this loan unit is US$200 for 12 calendar days.
