Reference Manual

7
Attaching the WR-R11a/WR-R11b (Transceiver)
A
Attaching the WR-R11a/WR-R11b
•
When attaching the WR-R11a/WR-R11b, be sure the connectors match
and are in the correct orientation; do not use force or insert the
connectors at an angle. Inserting the connectors in the wrong
orientation could damage the product.
•
To prevent unintended camera operation, be sure the WR-R11a/
WR-R11b is properly connected.
•
The WR-R11a/WR-R11b cannot be used with certain accessories.
Forcibly attempting to use the controller together with an incompatible
accessory could result in damage to, or malfunction of, the accessory or
camera.
•
With some film cameras, it may be necessary to rotate the WR-R11a to
align the mounting marks.
A
Removing the WR-R11a/WR-R11b
•
The WR-R11a/WR-R11b can be removed from the camera by performing
the steps to attach it in reverse order.
•
Remove the WR-R11a/WR-R11b from the camera when it is not in use.
Leaving it in place while transporting the camera either in a bag or
suspended from a strap could result in damage to the camera or
controller in the event that they are subject to excessive force or
vibration.