Reference Manual

36
Status LEDs
1 Displayed when the shutter-release button on the master camera,
WR-T10, or WR-1 is pressed. The same behavior is exhibited by the
LEDs on all WR-R11a/WR-R11b controllers.
2 Applies to cameras other than the D3, D3X, D3s, D2H, D2Hs, D2X,
D2Xs, D700, D300, D300s, D7000, D5100, D5000, D3100, and film
cameras.
Off On
The shutter-release button is
pressed all the way down.
1
On On Exposure in progress.
2
Off
Flashes rapidly
(2 flashes about
twice a second)
The Fn button on a WR-T10 or on
a WR-1 configured independently
as a transmitter is pressed.
Flashes (at
approximately
2-second intervals)
Off The camera standby timer is off.
Flashes rapidly
(about twice a
second)
Off The camera standby timer is on.
Flashes rapidly
(about 5 times a
second)
Off Ready to pair.
Flash on and off in rapid succession,
followed by green LED lighting for
about a second
Pairing complete.
Flickers (flashes
approximately 20
times a second)
Off Ending pairing.
Light twice simultaneously Pairing terminated.
Status/color
Description
Green Red