Owner's Manual

Page 14
Wireless Networking with Nikon Cameras
DR AFT #4
Configuring the D2H/WT-1 Transmitter
Now that the computer and FTP server are running, the Nikon equipment must
be setup to connect. There are several different ways to configure the D2H/WT-1
Wireless Transmitter. The easiest method is the WT1 Configuration Setup Pro-
gram which is used to easily configure all of the network settings. Before making
any changes turn the “Transceiver” to the “Off” setting in the “Wireless LAN”
sub-menu. For detailed information on setting up the WT-1 consult the WT-1
Wireless Transmitter User’s Manual.
WT1 Configurator Setup Program
To use the WT1 Configurator Setup Program simply launch the application and
fill in the blanks with the appropriate information. After filling in all of the fields
with the information specific to your network click the “Export...” button to save
the settings as a “.wt1” file.
The “.wt1” file is then put onto a compact flash card and inserted into the camera.
Use the “Load settings” command to choose the “.wt1“ file on the card and store
the settings on the camera.
Template File Upload
After following the steps in the “Wizard” (above) a text file will be written to the
computer which can then be written to the computer. If you know and understand
all of the variables which need to be configured you can manually create the “.txt”
file by filling in the blanks.
LocalIpAddress= Leave blank for DHCP/enter manual IP
SubnetMask= Leave blank for DHCP/enter manual subnet
GatewayIpAddress= Leave blank for DHCP/enter manual gateway
DnsIpAddress= Leave blank for DHCP/enter manual DNS Server
IsDhcpOn=1 Set “1” for DHCP “0” for manual IP
WvLanMode=0
WvLanChannel=1 Leave blank for default, set wireless channel