User's Manual

4
Attaching the WT-6
q Open the camera’s
peripheral
connector cover and
rotate it up out of
the way.
w Fully insert the WT-6
connector into the
camera peripheral
connector.
e Rotate the locking
wheel to lock the
WT-6 in place.
D Power Source
The WT-6 is not equipped with a battery or power switch. Power is
supplied from the camera.
A Connection Status
Connection status is shown by the camera
network indicator.
Network
indicator
Network indicator Status
I
(off)
Network functions
disabled.
K
(green)
Waiting to connect.
H
(flashes green)
Connected.
H
(flashes amber)
Error.