User’s Guide For Those Using the WT-7 with the D810, D810A, D750, or D7200

85Appendices
Appendices
Camera network profiles can be copied to a computer, which will
then automatically be configured for wireless connection (note
that Windows 7 is required if you wish to use this option in ad-hoc
mode).
1 Enable copying.
When the connection wizard prompts
you to choose whether to copy the profile
to a computer (027), highlight Ye s and
press J.
2 Connect the camera to the
computer.
When prompted, connect the camera to
the computer using the USB cable
supplied with the camera.
3 Start the Wireless Transmitter Utility.
When prompted, start the copy of the
Wireless Transmitter Utility installed on
the computer (05).
Copying Profiles