Reference Guide (PDF Edition)
Table Of Contents
- When your first photo can’t wait
- Package contents
- About this document
- Table of contents
- For your safety
- Notices
- Getting to know the camera
- First steps
- Basic photography and playback
- Basic settings
- Shooting controls
- The i menu
- Playback
- Menu guide
- Defaults
- The playback menu: Managing images
- The photo shooting menu: Shooting options
- Reset photo shooting menu
- Storage folder
- File naming
- Choose image area
- Image quality
- Image size
- RAW recording
- ISO sensitivity settings
- White balance
- Set Picture Control
- Manage Picture Control
- Color space
- Active D-Lighting
- Long exposure NR
- High ISO NR
- Vignette control
- Diffraction compensation
- Auto distortion control
- Flicker reduction shooting
- Metering
- Flash control
- Flash mode
- Flash compensation
- Release mode
- Focus mode
- AF-area mode
- Vibration reduction
- Auto bracketing
- Multiple exposure
- HDR (high dynamic range)
- Interval timer shooting
- Time-lapse video
- Focus shift shooting
- Silent photography
- The video recording menu: Video recording options
- Reset video recording menu
- File naming
- Frame size/frame rate
- Video quality
- Video file type
- ISO sensitivity settings
- White balance
- Set Picture Control
- Manage Picture Control
- Active D-Lighting
- High ISO NR
- Vignette control
- Diffraction compensation
- Auto distortion control
- Flicker reduction
- Metering
- Release mode (save frame)
- Focus mode
- AF-area mode
- Vibration reduction
- Electronic VR
- Microphone sensitivity
- Attenuator
- Frequency response
- Wind noise reduction
- Timecode
- Custom Settings: Fine-tuning camera settings
- Reset custom settings
- a: Autofocus
- b: Metering/exposure
- c: Timers/AE lock
- d: Shooting/display
- e: Bracketing/flash
- f: Controls
- g: Video
- The setup menu: Camera setup
- Format memory card
- Save user settings
- Reset user settings
- Language
- Time zone and date
- Monitor brightness
- Monitor color balance
- REC lamp brightness
- Information display
- AF fine-tuning options
- Non-CPU lens data
- Save focus position
- Image Dust Off ref photo
- Pixel mapping
- Image comment
- Copyright information
- Beep options
- Touch controls
- Self-portrait mode
- HDMI
- Airplane mode
- Connect to smart device
- Connect to computer
- Wireless remote (ML-L7) options
- Conformity marking
- USB power delivery
- Energy saving (photo mode)
- Slot empty release lock
- Save/load menu settings
- Reset all settings
- Firmware version
- The retouch menu: Creating retouched copies
- My Menu/Recent settings
- Establishing wireless connections to computers or smart devices
- Cabled connections to computers and HDMI devices
- On-camera flash photography
- Remote flash photography
- Troubleshooting
- Technical notes
- Compatible lenses and accessories
- Display in the monitor
- Compatible flash units
- Other compatible accessories
- Software
- Caring for the camera
- Caring for the camera and battery: Cautions
- Specifications
- Approved memory cards
- Portable chargers (power banks)
- Memory card capacity
- Available recording time
- Battery endurance
- Trademarks and licenses
- Notices
- Bluetooth and Wi-Fi (wireless LAN)
- Changes made via firmware updates
- Index
Caring for the camera
573
D Foreign matter on the image sensor
Foreign matter entering the camera when lenses or body caps are removed
or e
xchanged (or in rare circumstances lubricant or ne particles from the
camera itself) may adhere to the image sensor, where it may appear in
photographs taken under certain conditions. To prevent entry of foreign
matter when attaching the body cap or exchanging lenses, avoid dusty
environments and be sure to remove all dust and other foreign matter that
may be adhering to the camera mount, lens mount, or body cap. To protect
the camera when no lens is in place, be sure to replace the supplied body
cap. For foreign matter adhering to the image sensor, clean the image sensor
as described in “Manual cleaning” (0571), or have the sensor cleaned by
authorized Nikon service personnel. Photographs aected by the presence of
foreign matter on the sensor can be retouched using the clean image options
available in some imaging applications.
D Servicing the camera and accessories
The camera is a precision device and requires regular servicing; Nikon
r
ecommends that the camera be inspected once every one to two years, and
that it be serviced once every three to ve years (note that fees apply to
these services).
・ Frequent inspection and servicing are particularly recommended if the
camera is used professionally.
・ Any accessories regularly used with the camera, such as lenses or optional
ash units, should be included when the camera is inspected or serviced.