Reference Guide (PDF Edition)
Table Of Contents
- When your first photo can’t wait
- Package contents
- About this document
- Table of contents
- For your safety
- Notices
- Getting to know the camera
- First steps
- Basic photography and playback
- Basic settings
- Shooting controls
- The i menu
- Playback
- Menu guide
- Defaults
- The playback menu: Managing images
- The photo shooting menu: Shooting options
- Reset photo shooting menu
- Storage folder
- File naming
- Choose image area
- Image quality
- Image size
- RAW recording
- ISO sensitivity settings
- White balance
- Set Picture Control
- Manage Picture Control
- Color space
- Active D-Lighting
- Long exposure NR
- High ISO NR
- Vignette control
- Diffraction compensation
- Auto distortion control
- Flicker reduction shooting
- Metering
- Flash control
- Flash mode
- Flash compensation
- Release mode
- Focus mode
- AF-area mode
- Vibration reduction
- Auto bracketing
- Multiple exposure
- HDR (high dynamic range)
- Interval timer shooting
- Time-lapse video
- Focus shift shooting
- Silent photography
- The video recording menu: Video recording options
- Reset video recording menu
- File naming
- Frame size/frame rate
- Video quality
- Video file type
- ISO sensitivity settings
- White balance
- Set Picture Control
- Manage Picture Control
- Active D-Lighting
- High ISO NR
- Vignette control
- Diffraction compensation
- Auto distortion control
- Flicker reduction
- Metering
- Release mode (save frame)
- Focus mode
- AF-area mode
- Vibration reduction
- Electronic VR
- Microphone sensitivity
- Attenuator
- Frequency response
- Wind noise reduction
- Timecode
- Custom Settings: Fine-tuning camera settings
- Reset custom settings
- a: Autofocus
- b: Metering/exposure
- c: Timers/AE lock
- d: Shooting/display
- e: Bracketing/flash
- f: Controls
- g: Video
- The setup menu: Camera setup
- Format memory card
- Save user settings
- Reset user settings
- Language
- Time zone and date
- Monitor brightness
- Monitor color balance
- REC lamp brightness
- Information display
- AF fine-tuning options
- Non-CPU lens data
- Save focus position
- Image Dust Off ref photo
- Pixel mapping
- Image comment
- Copyright information
- Beep options
- Touch controls
- Self-portrait mode
- HDMI
- Airplane mode
- Connect to smart device
- Connect to computer
- Wireless remote (ML-L7) options
- Conformity marking
- USB power delivery
- Energy saving (photo mode)
- Slot empty release lock
- Save/load menu settings
- Reset all settings
- Firmware version
- The retouch menu: Creating retouched copies
- My Menu/Recent settings
- Establishing wireless connections to computers or smart devices
- Cabled connections to computers and HDMI devices
- On-camera flash photography
- Remote flash photography
- Troubleshooting
- Technical notes
- Compatible lenses and accessories
- Display in the monitor
- Compatible flash units
- Other compatible accessories
- Software
- Caring for the camera
- Caring for the camera and battery: Cautions
- Specifications
- Approved memory cards
- Portable chargers (power banks)
- Memory card capacity
- Available recording time
- Battery endurance
- Trademarks and licenses
- Notices
- Bluetooth and Wi-Fi (wireless LAN)
- Changes made via firmware updates
- Index
B
The setup menu: Camera setup
418
D Computer USB power delivery
･ U
se the supplied USB cable or optional UC-E25 USB cable (featuring Type
C connectors at both ends) to connect the camera to the computer.
Choose a USB cable with a connector that matches the USB connector on
the computer.
･ If you use the supplied USB cable to supply power from a computer, the
camera battery will be consumed even while power is being supplied. If
you use the separately sold UC-E25 USB cable, the camera battery will not
be consumed (the camera battery may be consumed depending on your
computer model and specications).
･ Depending on the model and product specications, some computers
will not supply current to power the camera.
D “Power delivery” versus “charging”
The supply of power for camera operations is referred to as “power delivery”,
while the t
erm “charging” is used when power is supplied only to charge the
camera battery. The conditions under which the power supplied by external
devices is used to power the camera or charge the battery are shown below.
Option selected for [USB power
deliv
ery]
CameraExternal power source used for
[Enable]
On* Power delivery
O Charging
[Disable]
On* —
O Charging
* Includes instances in which the power switch is in the “OFF” position but
Bluet
ooth upload is in progress or the memory card access lamp is lit.