Reference Manual

296 Menu Guide > A Custom Settings
Selecting Ye s allows adjustments that are normally made by
holding a button and rotating a command dial to be made by
rotating the command dial after the button is released. This ends
when the button is pressed again, the shutter-release button is
pressed halfway, or the standby timer expires.
• Release button to use dial applies to the E and S buttons.
• Release button to use dial also applies to controls to which
the following roles have been assigned using Custom Settings
f2 (Custom controls (shooting)) or g2 (Custom controls):
Choose image area, Image quality/size, White balance, Set
Picture Control, Active D-Lighting, Metering, Flash mode/
compensation, Release mode, Focus mode/AF-area mode,
Auto bracketing, Multiple exposure, HDR (high dynamic
range), Exposure delay mode, Peaking highlights, and
Microphone sensitivity.
If (W) is selected, the exposure indicator is
displayed with negative values on the left and positive values
on the right. Select (V) to display positive
values on the left and negative values on the right.
f5: Release Button to Use Dial
G button ➜ A (Custom Settings menu)
f6: Reverse Indicators
G button ➜ A (Custom Settings menu)