Reference Manual

361Establishing Wireless Connections to Computers or Smart Devices
6 Obtain or select an IP address.
Highlight one of the following options
and press J.
• Obtain automatically: Select this option
if the network is configured to
supply the IP address automatically.
• Enter manually: When prompted, enter
an IP address by rotating the main command dial to
highlight segments, pressing 4 and 2 to change and
pressing J to accept. Tap X to exit to the “IP address
configuration complete” dialog when entry is complete.
Tapping X again displays the sub-net mask, which you can
edit by pressing 1 and 3, pressing J to exit when entry is
complete.
Confirm the IP address and press J to proceed.
7 Launch the Wireless Transmitter Utility.
When prompted, launch the Wireless
Transmitter Utility on the computer.