Reference Manual

388 Establishing Wireless Connections to Computers or Smart Devices
8 Camera/iOS device: Follow the on-screen instructions.
Camera: Press J. The camera will
display a message stating that the
devices are connected.
iOS device: Pairing is complete. Tap OK to exit to the tab.
Pairing is now complete. The next time you use the SnapBridge
app, you can connect as described in “Connecting to a Paired
Device” (0 389).
D Pairing for the First Time
The first time you pair the iOS device with a camera after installing
the SnapBridge app, you will be prompted to select auto link (auto
upload and auto clock and location synchronization) options. This
prompt will not appear again, but auto link settings can be
accessed at any time using Auto link in the tab.
D Ending Bluetooth Connections
To end the connection to the smart device, select Disable for Connect
to smart device > Pairing (Bluetooth) > Bluetooth connection in
the camera setup menu.