Reference Manual

390 Establishing Wireless Connections to Computers or Smart Devices
Solutions to some common issues are listed below.
Troubleshooting information for the SnapBridge app can be
found in the app’s online help, which can be viewed at:
https://nikonimglib.com/snbr/onlinehelp/en/index.html
For information on the Wireless Transmitter Utility or
Camera Control Pro 2, see the online help for the application in
question.
Troubleshooting
Problem Solution 0
The camera displays a
TCP/IP error.
Check settings for the host computer or
wireless router and adjust camera
settings appropriately.
321
The camera displays a
“no memory card” error.
Confirm that the memory card is
correctly inserted.
32
Upload is interrupted
and fails to resume.
Upload will resume if the camera is
turned off and then on again.
364
The connection is
unreliable.
If Auto is selected for Channel, choose
Manual and select the channel
manually.
319
If the camera is connected to a
computer in infrastructure mode, check
that the router is set to a channel
between 1 and 8.
321