Reference Manual

Technical Notes ➜ NIKKOR Z DX 50–250mm f/4.5–6.3 VR Lens User’s Manual480
❚❚ Using Built-in Flash Units
Shadows will be visible in photos where the light from the built-
in flash is obscured by the lens or lens hood. Remove the lens
hood before shooting. Note, however, that even if the hood is
removed, shadows may still be visible at some focal lengths and
subject distances.
❚❚ Vibration Reduction (VR)
The lens’s on-board vibration reduction can be enabled or
disabled using camera controls; see the camera manual for
details. Vibration reduction reduces blur caused by camera
shake, allowing shutter speeds up to 5.0 stops slower than
would otherwise be the case and increasing the range of shutter
speeds available.
Note: The effects of VR on shutter speed are measured according
to Camera and Imaging Products Association (CIPA) standards.
DX-format lenses are measured using a DX-format camera with
on-camera VR set to Normal. Zoom lenses are measured at
maximum zoom.
Shadow Shadow