Technical Guide (RAW Video Recording Edition)

• Please make sure the camera is turned off before plugging/

unplugging the HDMI cable.

• A cable clip is recommended to prevent the HDMI cable from

being accidentally detached.

• If the image is not displayed on the Video Assist 12G monitor,

please check the HDMI cable connections.

• An SD card must be inserted into the Video Assist 12G for recording.

• Please make sure the camera's photo/movie selector is rotated to

movie mode.

Note:

Connect an HDMI cable

to the camera’s HDMI

connector

Connect the other end to

the Video Assist 12G HDMI

video input

Connecting the camera with the

Video Assist 12G

RAW video output settings 1

Video Assist 12G

Z 7II/ Z 6II

HDMI cable