Technical Guide (RAW Video Recording Edition)

• Please make sure the camera is turned off before plugging/

unplugging the HDMI cable.

• A cable clip is recommended to prevent the HDMI cable from

being accidentally detached.

• If the image is not displayed on the Ninja V monitor, please

check the HDMI cable connections.

• An SSD drive must be inserted into the Ninja V for recording.

• Please make sure camera's photo/movie selector is rotated to

movie mode.

Note:

Connect an HDMI cable

to the camera’s HDMI

connector

Connect the other end to

the Ninja V HDMI video

input

Connecting the camera with the

Atomos Ninja V

RAW video output settings 1

Ninja V

Z 7II/ Z 6II

HDMI cable