Reference Manual

745
Caring for the Camera and Battery: Cautions
●
The Lens Contacts
Keep the lens contacts clean. Avoid touching them with your fingers.
●
Store in a Well-Ventilated Area
To prevent mold or mildew, store the camera in a dry, well-ventilated
area. Do not store the camera with naphtha or camphor moth balls, next
to equipment that produces strong electromagnetic, or where it will be
exposed to extremely high temperatures, for example near a heater or in
an enclosed vehicle on a hot day. Failure to observe these precautions
could result in product malfunction.
●
Long-Term Storage
To prevent damage caused by, for example, leaking battery fluid, remove
the battery if the product will not be used for an extended period. Store
the camera in a plastic bag containing a desiccant. Do not, however, store
the leather camera case in a plastic bag, as this may cause the material to
deteriorate. Store the battery in a cool, dry place. Note that desiccant
gradually loses its capacity to absorb moisture and should be replaced at
regular intervals. To prevent mold or mildew, take the camera out of
storage at least once a month, insert the battery, and release the shutter a
few times.
●
Turn the Product Off Before Removing or Disconnecting the Power
Source
Removing or disconnecting the power source while the camera is on
could damage the product. Particular care should be taken not to remove
or disconnect the power source while images are being recorded or
deleted.