Reference Manual

Table Of Contents
466
B
The Setup Menu: Camera Setup
Record data for non-CPU lenses attached using an optional
mount adapter. Recording the focal length and maximum
aperture of non-CPU lenses allows them to be used with some
camera features normally reserved for CPU lenses, such as on-
board vibration reduction.
If [On] is selected, the camera will save the focus position in
effect when the camera is turned off and restore it when the
camera is turned on.
The focus position may change due to changes in zoom or
ambient temperature.
This option applies only with autofocus Z mount lenses.
If [On] is selected, it may be some time before you can operate
the camera after turning it on.
Non-CPU Lens Data
G
button
U
B
setup menu
Option Description
[Lens number] Choose a lens identifier.
[Focal length
(mm)]
Enter the focal length.
[Maximum
aperture]
Enter the maximum aperture.
Save Focus Position
G
button
U
B
setup menu