Reference Manual

810
Features Available with “C” Firmware Version 1.30
3
Adjust hue and brightness.
•
Press
4
or
2
to adjust hue on the
M (magenta)–Y (yellow) axis.
Magenta increases as you move
toward M, amber (yellow) as you
move toward Y.
•
Press
1
or
3
to adjust brightness. Brightness increases as
the values go up and decreases as they go down.
•
The selected values are displayed to the right of the grid.
•
To restore default settings, press the
O
button.
4
Save changes.
•
Press
J
to save changes and exit to the menus.
•
Modes that have been altered from default values are
indicated by asterisks (“
U
”).
•
Repeat Steps 1 through 4 to create additional modes.
5
Highlight [Mode 1], [Mode 2], [Mode 3], or [Off] in
the [Portrait impression balance] display and
press
J
.
•
The selected mode will be applied to all subsequent
pictures.
•
Selecting [Off] (the default setting) disables portrait
impression balance.