Reference Manual

471

The Setup Menu: Camera Setup

Pixel mapping checks and optimizes the camera image sensor.

If you notice unexpected bright spots appearing in pictures

taken with the camera, perform pixel mapping as described

below.

•

Pixel mapping is available only when a Z mount lens or an

optional FTZ mount adapter is attached.

•

To prevent unexpected loss of power, use a fully-charged

battery, a charging AC adapter (available separately for the

Z 6II, supplied with the Z 7II), or an optional AC adapter and

power connector.

Select [Pixel mapping] in the setup menu.

Turn the camera on, press the

button, and select [Pixel

mapping] in the setup menu.

Select [Start].

Pixel mapping will start. A message is displayed while the

operation is in progress.

Turn the camera off when pixel mapping is

complete.

Pixel Mapping

button

setup menu