Reference Manual

609
Connecting to HDMI Devices
D
No HDMI Output
HDMI output is not available when:
•
1920 × 1080 120p, 1920 × 1080 100p, or 1920 × 1080 slow-motion is
selected for frame size/frame rate, or
•
the camera is in movie mode and connected to a computer running
Camera Control Pro 2
D
[10 Bit] Selected for [Output Data Depth]
•
The HDMI signal will be output at a bit depth of 10 bits only to HDMI
recorders that support this option.
•
Regardless of the option selected for monitor mode, the display will
switch to the camera monitor and the viewfinder will turn off.
•
When 3840 × 2160 is selected for movie frame size:
- movies will not be recorded to memory cards inserted in the camera,
and
- the angle of view when shooting in DX format with the Z 7II will be
reduced to about 90%. The angle of view for the Z 6II is reduced to
about 90% regardless of format.
•
The indicators in the camera monitor will be displayed at low resolution.
•
No photos will be recorded when the shutter-release button is pressed
all the way down.
•
Electronic vibration reduction is disabled.
•
Frame size/frame rate settings of 3840 × 2160; 60p or 3840 × 2160; 50p
are not available for footage output via HDMI. If 3840 × 2160; 60p or
3840 × 2160; 50p was selected before recording began, the footage will
be output at 3840 × 2160; 30p or 3840 × 2160; 25p, respectively.