Reference Guide (PDF Edition)

Table Of Contents
Tip: Bracketing Options
When [AE & flash brack
eting] is selected, the camera varies both exposure and flash level. Select
[AE bracketing] to vary only exposure, [Flash bracketing] to vary only flash level. Note that flash
bracketing is available in i-TTL and, where supported, auto aperture (qA) flash control modes only
(
0 390, 0 830).
Tip: Exposur
e and Flash Brack
eting
[Number of shots] and [Increment] can also be selected via the [Auto bracketing] item in the
photo shooting menu.
In continuous release modes, shooting will pause after the number of shots specified in the
bracketing program has been taken. Shooting will resume the next time the shutter-release button
is pressed.
If the camera is turned off before all shots in the sequence have been taken, bracketing will resume
from the first shot in the sequence when the camera is turned on.
Tip: Exposure Bracketing
The settings (shutter speed and/or aperture) altered during exposure bracketing vary with the shooting
mode.
Mode Setting
P Shutter speed and aperture
1
S Aperture
1
A Shutter speed
1
M Shutter speed
2, 3
If [ON] is selected for [ISO sensitivity settings]> [Auto ISO sensitivity control] in the photo
shooting menu, the camera will automatically vary ISO sensitivity for optimum exposure when the
limits of the camera exposure system are exceeded.
If [ON] is selected for [ISO sensitivity settings]> [Auto ISO sensitivity control] in the photo
shooting menu, the camera will vary ISO sensitivity.
Use Custom Setting e6 [Auto bracketing (mode M)] to choose whether the camera varies both
shutter speed and aperture or any one of shutter speed, aperture, and ISO sensitivity when [OFF]
is selected for [ISO sensitivity settings] > [Auto ISO sensitivity control] in the photo shooting
menu.
166
Bracketing
1
2
3