Reference Guide (PDF Edition)

Obtain or select an IP address.
Highlight one of the following options and pr
ess J.
Highlight [Group name], press 2, and enter a gr
oup name.
Enter a group name for the synchronized cameras. Group
names can be up to eight characters long.
All master and remote cameras on the network must be in
the same group.
Option Description
[Obtain
automatically]
Select this option if the netw
ork is configured to supply the IP address
automatically. A “configuration complete” message will be displayed
once an IP address has been assigned.
It is recommended that you note the remote camera IP address, as
you will need it in subsequent steps.
[Enter
manually]
Ent
er the IP address and sub-net mask manually.
Press
J; you will be prompted to enter the IP address.
Rotate the main command dial to highlight segments.
Press 4 or 2 to change the highlighted segment and press J to save
changes.
Next, press X; a “configuration complete” message will be displayed.
Press X again to display the sub-net mask.
Press 1 or 3 to edit the sub-net mask and press J; a “configuration
complete” message will be displayed.
Press J
to proceed when the “configuration complete” message is displayed.
The camera will initiat
e the connection. The profile name is displayed when a connection is
established.
381
Synchronized Release
6
7
8