Reference Guide (PDF Edition)

Role Description
E
[High-frequency
f
licker reduction]
Pressing the control allows shutter speed to be fine-tuned in
smaller increments. Press the control a second time to restore
normal shutter-speed selection.
1
[Bracketing burst]
If the control is pressed when an option other than [WB
bracketing] is selected for [Auto bracketing]> [Auto
bracketing set] in the photo shooting menu in continuous
release mode, the camera will take all the shots in the
current bracketing program and repeat the bracketing burst
while the shutter-release button is pressed. In single-frame
release mode, shooting will end after the first bracketing
burst.
If [WB bracketing] is selected for [Auto bracketing set],
the camera will take pictures while the shutter-release
button is pressed and apply white balance bracketing to
each shot.
c
[Sync. release
selection]
When [
Synchronized release] is selected for [Connect to
other cameras
] in the network menu, or when a wireless
remote controller is used for synchronized release, the chosen
control can be used to toggle between remote release and
master or synchronized release. The options available depend
on the setting chosen for Custom Setting d4 [Sync. release
mode options].
The following options are available when [Sync] is selected
for [Sync. release mode options]:
[Master release only] (c): Keep the control pressed to
take pictures with the master camera only.
[Remote release only] (d): Keep the control pressed
to take pictures only with the remote cameras.
The following options are available when [No sync] is
selected for [Sync. release mode options]:
[Synchronized release] (6): Keep the control pressed
to synchronize the releases on the master and remote
cameras.
[Remote release only] (d): Keep the control pressed
to take pictures only with the remote cameras.
629
f2: Custom Controls (Shooting)
-
-
-
-