Reference Guide (PDF Edition)

Table Of Contents
Role Description
L
[Override other
cameras
]
Press the control to remotely take over the master camera
role from another camera functioning as a master camera
commanding remote cameras during synchronized release.
This option takes effect when multiple cameras in the same
group have been designated as masters using [Connect to
other cameras] in the network menu.
It cannot be used to promote cameras functioning in the
remote role to the role of master camera.
4
[+RAW]
If a JPEG or HEIF option is currently selected for image
quality, “RAW” will appear in the shooting display and an
NEF (RAW) copy will be recorded with the next picture
taken after the control is pressed. The original image
quality setting will be restored when you remove your
finger from the shutter-release button or press the control
again, canceling [+RAW].
NEF (RAW) copies are recorded at the settings currently
selected for [RAW recording] in the photo shooting menu.
L
[Silent mode] Press the control to enable silent mode. Press again to disable.
M
[Cycle live view info
display]
Press the control to cycle the shooting display. The type and
content of the displays available can be chosen using Custom
Settings d17 [Custom monitor shooting display] and d18
[Custom viewfinder shooting display].
b
[Live view info
display off]
Press the control to hide icons and other information in the
shooting display. Press again to view.
b
[Framing grid]
Press the control to display a framing grid. To hide the grid,
press the control again. The display type can be selected using
Custom Setting d15 [Grid type].
p
[Zoom on/off]
Press the control to zoom the display in on the area around
the current focus point. Press again to cancel zoom.
D
[Virtual horizon]
Press the control to enable the virtual horizon display. Press
again to hide the display. The display type can be selected
using Custom Setting d16 [Virtual horizon type].
630
f2: Custom Controls (Shooting)