Reference Guide (PDF Edition)

D Cautions: Using the UltraSync BL
UE
Time codes will not be recorded if [H.264 8-bit (MP4)] is selected for [Video file type] in the video
recording menu.
The UltraSync BLUE allows users to choose the frame rate. If the value is not a match for that chosen
with the camera, time codes will not be recorded or output via HDMI. Match the frame rate for the
UltraSync BLUE to the video recording frame rate as follows:
Video recording frame rate UltraSync BLUE frame rate
120p, 60p, 30p 29.97 fps, 29.97 fps DF
100p, 50p, 25p 25 fps
24p 23.98 fps
Select 29.97 fps DF for drop-frame recording.
See the documentation for the UltraSync BLUE for information on choosing a frame rate.
The options selected for [Timecode] > [Count-up method], [Timecode origin], and [Drop frame]
in the video recording menu cannot be changed while the camera has a wireless connection to the
UltraSync BLUE.
If the camera loses the wireless connection to the UltraSync BLUE while filming is in progress, it
will continue to record time codes until the end of the current shot, although the time code shown
in the shooting display will switch to “--:--:--:--“ about 60 seconds after the connection is lost. The
time code will reappear when the wireless connection to the UltraSync BLUE is re-established.
The wireless connection to the UltraSync BLUE will end when the camera is turned off or the standby
timer expires. We recommend choosing [No limit] for Custom Setting c3 [Power off delay] >
[Standby timer].
785
ATOMOS AirGlu BT Options
-
-