Reference Guide (PDF Edition)

Table Of Contents
Exposure
Metering system TTL metering using camera image sensor
Metering mode
Matrix metering
Center
-weighted metering: Weight of 75% given to 12 or
8mm circle in center of frame or weighting can be based on
average of entire frame
Spot metering: Meters circle with a diameter of approximately
4mm centered on selected focus point
Highlight-weighted metering
Range
*
−3 – +17EV
Figures are for ISO 100 and f/2.0 lens at 20°C/68°F
Mode
P: programmed auto with flexible program, S: shutter-priority auto,
A: aperture-priority auto, M: manual
Exposure compensation −5 – +5EV (choose from step sizes of ¹⁄₃ and ¹⁄₂EV)
Exposure lock Luminosity locked at detected value
ISO sensitivity
(Recommended Exposure
Index)
ISO 64–25600 (choose from step sizes of ¹⁄₃ and 1EV); can also be
set to approx. 0.3, 0.7, or 1EV (ISO 32 equivalent) below ISO 64 or
to approx. 0.3, 0.7, 1, or 2EV (ISO 102400 equivalent) above ISO
25600; auto ISO sensitivity control available
Note: ISO sensitivity is limited to 400–25600 when HLG is selected
for tone mode.
Active D‑Lighting Auto, Extra high 2, Extra high 1, High, Normal, Low, and Off
Multiple exposure Add, average, lighten, darken
Other options
HDR overlay, photo mode flicker reduction, high-frequency flicker
reduction
910
Specifications
*