Reference Guide (PDF Edition)

Table Of Contents
Obtain or select an IP address.
Highlight one of the following options and press J
.
Highlight [Group name], press 2, and enter a group name.
Ent
er a group name for the synchronized cameras. Group
names can be up to eight characters long.
All master and remote cameras on the network must be in
the same group.
Option Description
[Obtain
automatically]
Select this option if the network is configur
ed to supply the IP address
automatically. A “configuration complete” message will be displayed
once an IP address has been assigned.
It is recommended that you note the remote camera IP address, as
you will need it in subsequent steps.
[Enter
manually]
Enter the IP addr
ess and sub-net mask manually.
Press J
; you will be prompted to enter the IP address.
Rotate the main command dial to highlight segments.
Press 4 or 2 to change the highlighted segment and press J to save
changes.
Next, press X; a “configuration complete” message will be displayed.
Press X again to display the sub-net mask.
Press 1 or 3 to edit the sub-net mask and press J; a “configuration
complete” message will be displayed.
Press J
to proceed when the “configuration complete” message is displayed.
The pro
file name is displayed when a connection is established.
375
Synchronized Release
7
8
9