Setting Guide (Video Edition)
Table Of Contents
15
Getting Ready
The Video Recording Display, Continued
15
■ Quick Display Selection
Controls can be assigned display-related functions using Custom Setting g2 [Custom controls].
b [Live view info display o]: Pressing the control hides indicators
in the shooting display. Press again to view indicators.
b [Framing grid]: Pressing the control displays a framing grid. Press
the control again to turn the display o. The display type can be se-
lected using Custom Setting g13 [Grid type].
D [Virtual horizon]: Pressing the control displays the virtual horizon.
Press the control again to turn the display o. The display type can be
selected using Custom Setting d17 [Virtual horizon type].
■ Using Zoom in Video Mode
To zoom in on the display in video mode (to a maximum of approxi-
mately 16×), press the X button.
Use the X and W (Q) buttons to zoom in and out.
A navigation window will appear at the bottom right corner of the
display.
Use the multi selector to scroll to areas of the frame not visible in the
display.
Press X during recording to zoom the display in 50%, 100% (1 : 1), or 200%. Press W (Q) to zoom
out.
50% zoom is not available at a frame size of 1920× 1080.
Zoom is not available during RAW recording.
When viewing videos, you can zoom in on the current frame while playback is paused.
When shooting in video mode, you can also zoom in on the current fo-
cus point using a control assigned [Zoom on/o] via Custom Setting
g2 [Custom controls]. The zoom ratio can be chosen from [Low mag‑
nication (50%)], [1 : 1 (100%)], and [High magnication (200%)].